Makita EA5600FREG
Built for demanding farm and ranch applications, this gas-powered chainsaw combines professional-grade performance with Japanese engineering reliability. Its robust 55.6cc engine generates an impressive 4.1 horsepower, spinning the chain at up to 13,800 rpm for efficient cutting through various wood types. The powerhead weighs just 5.8 kilograms without bar and chain, offering an excellent power-to-weight ratio that reduces operator fatigue during extended use.
Designed with a recommended 45.7cm (18-inch) bar and 3/8-inch chain pitch, this saw handles medium to large diameter logs with confidence. The fuel system features a generous 0.57-liter tank capacity paired with a 0.32-liter oil reservoir, providing extended runtime between refills. Operating on a standard 50:1 fuel mixture, it delivers the consistent performance that Makita's century-plus legacy in power tool manufacturing promises.
Technical Specifications
Alternatives →| Engine Displacement | 55.6 cc |
| Power Output | 3 kW |
| Power Output (HP) | 4.1 hp |
| Maximum Speed | 13800 rpm |
| Recommended Bar Length | 45.7 cm |
| Chain Pitch | 3/8 " |
| Weight (without bar and chain) | 5.8 kg |
| Fuel Tank Capacity | 0.57 l |
| Oil Tank Capacity | 0.32 l |
| Intended Use | Farm/Ranch |
| Fuel Type | 50:1 |
Frequently asked questions
Is the Makita EA5600FREG a homeowner saw or a working one?
Makita lists the EA5600FREG for farm and ranch use, a step above weekend garden work, with a 55.6 cc engine making 3 kW, or 4.1 hp. That is enough for felling and bucking around a property, clearing storm damage and cutting firewood in quantity, rather than the occasional branch a small electric saw covers.
How much does the Makita EA5600FREG weigh?
The Makita EA5600FREG weighs 5.8 kg without bar and chain. Add the 45.7 cm bar, a chain, 0.57 litres of fuel and 0.32 litres of chain oil, and the saw in your hands is meaningfully heavier. At that weight it is a two-handed ground saw, fine for a session but not for overhead work.
How high does the Makita EA5600FREG rev?
Makita gives a maximum speed of 13,800 rpm for the EA5600FREG, a high ceiling that helps the 3 kW engine hold chain speed inside a cut. Idle speed and chain speed are not published for this model, so it has to be compared with rivals on displacement, the 55.6 cc figure, and on power.
What bar and chain does the Makita EA5600FREG use?
The Makita EA5600FREG is set up for a 45.7 cm bar running 3/8 inch pitch chain. That pairing is the common working standard: 45.7 cm reaches through most farm timber in a single pass, and 3/8 inch pitch chain is stocked by every dealer, so spares and sharpening kit are easy to find.
How big are the tanks on the Makita EA5600FREG?
The Makita EA5600FREG carries 0.57 litres of fuel and 0.32 litres of chain oil. The oil tank holds a little over half the fuel volume, which is the usual pairing: fill both together and they run down at roughly the same rate, so the 45.7 cm bar never finds itself dry mid-tank.
What fuel does the Makita EA5600FREG need?
The Makita EA5600FREG runs on petrol premixed with two-stroke oil at 50:1, so it needs mixed fuel and never straight pump petrol. Measure the mix accurately: too little oil puts the 55.6 cc engine at risk, too much fouls the plug. With a 0.57 litre tank, small fresh batches are easier to keep in condition.
See alternatives to the Makita EA5600FREG →
Source: www.makitatools.com