Husqvarna T542i XP Tool Only
Built for professional arborists and tree care specialists, this battery-powered chainsaw delivers impressive performance without the noise and emissions of traditional gas engines. Its compact design weighs just 2.9 kg without bar and chain, making it ideal for precise work in tree canopies and confined spaces. The powerhead generates 1.79 kW of output power (2.4 HP) with a chain speed reaching 24.1 m/s, providing cutting performance that rivals comparable gas models. Professional users will appreciate the reduced vibration levels of 4.7 m/s² at the front handle and 4.1 m/s² at the rear, enabling extended use with less fatigue. The saw accommodates bars up to 40.6 cm maximum length, with a recommended 30 cm bar for optimal balance and performance. Sound levels are significantly reduced compared to gas chainsaws, with just 91 dB(A) sound pressure level, making it suitable for noise-sensitive environments.
Technical Specifications
| Power Output | 1.79 kW |
| Power Output (HP) | 2.4 hp |
| Recommended Bar Length | 30 cm |
| Maximum Bar Length | 40.6 cm |
| Chain Pitch | 0.325 " |
| Chain Speed | 24.1 m/s |
| Weight (without bar and chain) | 2.9 kg |
| Oil Tank Capacity | 0.2 l |
| Sound Pressure Level | 91 dB(A) |
| Sound Power Level | 104 dB(A) |
| Vibration Front Handle | 4.7 m/s² |
| Vibration Rear Handle | 4.1 m/s² |
| Intended Use | Professional |
| Fuel Type | Battery |
Frequently asked questions
Does the Husqvarna T542i XP tool-only include a battery and charger?
The Husqvarna T542i XP tool-only listing is the bare saw: no battery and no charger are supplied, so it assumes you already run Husqvarna packs. Husqvarna publishes no runtime for the T542i XP, and time per charge depends entirely on which pack is fitted, so plan rotations around the batteries you already own.
Who is the Husqvarna T542i XP tool-only designed for?
The Husqvarna T542i XP is a top-handle battery saw listed by Husqvarna for professional use, which in practice means trained arborists cutting aloft on rope or from a platform. At 2.9 kg without bar and chain it is sized for moving around inside a canopy. Ground felling and general property work call for a rear-handle saw instead.
What bar length does the Husqvarna T542i XP tool-only take?
Husqvarna recommends a 30 cm bar on the T542i XP and permits up to 40.6 cm. The 30 cm setup keeps the nose short and predictable among branches, which is what matters in a canopy. The 40.6 cm option buys reach for larger dismantling cuts, at the cost of a longer, less nimble front end.
How much power does the Husqvarna T542i XP tool-only produce?
The Husqvarna T542i XP is rated at 1.79 kW, or 2.4 hp. On a top-handle saw that output is aimed at repeated pruning and sectioning cuts rather than sustained felling of large timber, and it is delivered through whichever battery pack you fit, since no pack comes with the tool-only listing.
How much does the Husqvarna T542i XP tool-only vibrate?
The Husqvarna T542i XP records 4.7 m/s² at the front handle and 4.1 m/s² at the rear. Those are mid-range figures for a chainsaw and they set the practical limit on a climbing day: the front grip, the higher of the two, is the hand that tires first when cuts follow one another for hours.
How much bar oil does the Husqvarna T542i XP tool-only hold?
The Husqvarna T542i XP carries 0.2 litres of bar oil, feeding a 0.325 inch pitch chain. Two tenths of a litre is a small tank, so checking the level at every battery change is the sensible habit: running the bar dry aloft wears chain and rail fast, and there is no easy way to top up mid-climb.
Source: www.husqvarna.com